Macramé wall hanging DIY

{{whyLabel}}: The thickness and structure of 3-ply cord are ideal for beginners as it is sturdy, easy to handle, and provides clear knot definition.

{{howLabel}}:

• Look for 100% recycled cotton for a soft feel and eco-friendly profile.
• Ensure you have at least 50-60 meters for a medium-sized project.
• Choose a natural or off-white color to make your knots easily visible while learning.

{{doneWhenLabel}}: You have a spool of 4mm-5mm cotton cord ready.

{{whyLabel}}: This serves as the structural foundation that holds the weight of your textile art.

{{howLabel}}:

• Use a smooth wooden dowel for a modern look or a cleaned piece of driftwood for a rustic boho vibe.
• Ensure the diameter is between 1.5cm and 2.5cm to support the cord weight without bending.
• Sand any rough spots to prevent snagging the cotton fibers.

{{doneWhenLabel}}: A sturdy, clean dowel or branch is prepared.

{{whyLabel}}: Working vertically allows gravity to help keep your cords straight and prevents back strain from leaning over a table.

{{howLabel}}:

• Use two S-hooks to hang your dowel from a clothing rack, a door frame, or a wall-mounted rod.
• Ensure the dowel is at eye level to maintain a comfortable posture.
• Secure the dowel so it doesn't slide left or right while you pull on the cords.

{{doneWhenLabel}}: Your dowel is hanging securely at eye level.

{{whyLabel}}: This is the standard knot used to attach your cords to the dowel.

{{howLabel}}:

• Fold a scrap cord in half.
• Place the loop over the dowel, then pull the two ends through the loop from behind.
• Tighten it so the 'bump' faces forward (standard) or backward (reverse).

{{doneWhenLabel}}: You can confidently attach a cord to the dowel without hesitation.

{{whyLabel}}: The Square Knot is the building block of macramé patterns and provides structural integrity.

{{howLabel}}:

• Use 4 cords: 2 outer 'working' cords and 2 inner 'filler' cords.
• Cross the left cord over the fillers and under the right cord.
• Pull the right cord behind the fillers and through the left loop; tighten.
• Repeat starting with the right cord to complete the 'square'.

{{doneWhenLabel}}: You have created a row of 5 consistent, flat square knots.

{{whyLabel}}: This creates a beautiful DNA-like twist that adds texture and dimension to your wall hanging.

{{howLabel}}:

• Follow the first half of a Square Knot (left side only).
• Instead of alternating to the right, keep repeating the left-side knot.
• The cord will naturally begin to rotate; let it twist and continue knotting.

{{doneWhenLabel}}: You have a 5cm long spiral cord segment.

{{whyLabel}}: This knot is used to create clean lines, borders, and geometric shapes like diamonds.

{{howLabel}}:

• Hold one cord (the 'lead' cord) at the angle you want your line to go.
• Take the next cord, wrap it over and then under the lead cord to form a loop; pull tight.
• Repeat the wrap with the same cord to lock it (two wraps per cord).

{{doneWhenLabel}}: You have created a straight diagonal line across four cords.

{{whyLabel}}: Standard calculation for a wall hanging is 4-6 times the finished length; 4 meters allows for a ~60cm finished piece with fringe.

{{howLabel}}:

• Use a measuring tape to mark 4 meters.
• Use sharp fabric scissors to ensure clean ends that won't fray prematurely.
• Cut all 12 pieces before you start knotting to ensure uniformity.

{{doneWhenLabel}}: You have 12 identical 4-meter cords ready.

{{whyLabel}}: This creates 24 working strands (since each cord is folded) which is the perfect width for a 30cm dowel.

{{howLabel}}:

• Fold each 4m cord exactly in half.
• Space them evenly across the dowel, leaving about 2cm of wood visible on each end.
• Ensure all knots face the same direction for a professional look.

{{doneWhenLabel}}: 24 strands are hanging evenly from the dowel.

{{whyLabel}}: This stabilizes the piece and creates a clean top border.

{{howLabel}}:

• Group the 24 strands into 6 groups of 4.
• Tie one Square Knot in each group, keeping them tight against the dowel.
• Check that all knots are level horizontally.

{{doneWhenLabel}}: A straight horizontal row of 6 square knots is complete.

{{whyLabel}}: This creates a 'mesh' or 'net' pattern that is the hallmark of boho macramé.

{{howLabel}}:

• For the second row, skip the first 2 strands on the left.
• Use the next 4 strands to tie a Square Knot (this 'bridges' the knots above).
• Continue across, leaving the last 2 strands on the right unworked.
• For the third row, use all strands again starting from the far left.

{{doneWhenLabel}}: You have a beautiful diamond-mesh pattern about 10cm long.

{{whyLabel}}: This defines the bottom of the main pattern and adds a sophisticated geometric finish.

{{howLabel}}:

• Find the two center-most cords.
• Use the left center cord as a lead and work diagonal double half hitches toward the left edge.
• Use the right center cord as a lead and work toward the right edge.
• Ensure the tension is consistent to keep the 'V' symmetrical.

{{doneWhenLabel}}: A crisp V-shaped line borders the bottom of your mesh.

{{whyLabel}}: Trimming removes excess cord and gives the piece a clean, intentional silhouette.

{{howLabel}}:

• Use masking tape to mark a 'V' line on the hanging cords to act as a cutting guide.
• Use very sharp scissors to cut along the tape line.
• Cut slightly longer than you think; you can always trim more, but you can't add it back.

{{doneWhenLabel}}: The bottom of the wall hanging has a neat, symmetrical V-shape.

{{whyLabel}}: Brushing the 3-ply cord unravels the strands, creating a voluminous, soft boho fringe.

{{howLabel}}:

• Use a fine-tooth comb or a pet slicker brush.
• Start from the very bottom and work your way up slowly to avoid knotting the fibers.
• Hold the cord firmly above where you are brushing to prevent pulling the knots loose.

{{doneWhenLabel}}: The fringe is fluffy, straight, and soft to the touch.

{{whyLabel}}: This allows you to hang the piece on a nail or hook without the dowel tilting.

{{howLabel}}:

• Cut a 60cm piece of cord.
• Tie a simple overhand knot at each end of the dowel, outside of your Lark's Head knots.
• Adjust the length so the triangle formed by the cord is aesthetically pleasing.

{{doneWhenLabel}}: The wall hanging is ready to be mounted on a wall.