Terrarium building guide

{{whyLabel}}: A clear container allows maximum light for photosynthesis, while a lid traps humidity to create a self-sustaining water cycle.

{{howLabel}}:

• Choose a container made of clear, non-tinted glass (e.g., a large cookie jar, apothecary jar, or specialized terrarium vessel).
• Ensure the lid fits snugly; it doesn't need to be 100% airtight, but it must retain moisture.
• Clean the glass thoroughly with warm water and mild soap to remove any residues.

{{doneWhenLabel}}: You have a clean, transparent glass container with a matching lid ready for assembly.

{{whyLabel}}: Closed terrariums create high-humidity environments that only specific tropical species can survive in.

{{howLabel}}:

• Select small, slow-growing plants like Fittonia (Nerve Plant), Asparagus Fern, Peperomia, or Polka Dot Plant.
• Look for "plug" sized plants as they are easier to maneuver into small openings.
• Avoid succulents or cacti, as they will rot in the high humidity of a closed system.

{{doneWhenLabel}}: You have 3–5 small tropical plants suited for high humidity.

{{whyLabel}}: A layered system is critical to prevent root rot and maintain soil health over several years.

{{howLabel}}:

• Get drainage material: Expanded clay pebbles (LECA) or small river stones.
• Get filtration: Activated horticultural charcoal (prevents odors and purifies water).
• Get substrate components: Coco coir (peat-free base), orchid bark (for aeration), and worm castings (for nutrients).

{{doneWhenLabel}}: All dry materials are organized and ready on your workspace.

{{whyLabel}}: This layer acts as a reservoir for excess water, keeping it away from the plant roots to prevent rot.

{{howLabel}}:

• Gently pour 2–3 cm (approx. 1 inch) of LECA or pebbles into the bottom of the container.
• Level the layer using a spoon or by gently shaking the glass.
• Ensure the layer is deep enough to hold a small amount of visible water without touching the soil above.

{{doneWhenLabel}}: A level 2-3 cm layer of drainage material covers the bottom of the glass.

{{whyLabel}}: A barrier prevents the fine substrate from falling into the drainage layer, which would cause waterlogging and rot.

{{howLabel}}:

• Cut a piece of fine fiberglass mesh or plastic screen to the exact diameter of your container.
• Alternatively, use a thin, compressed layer of dried Sphagnum moss.
• Lay it flat over the drainage pebbles, ensuring it covers the entire surface to the edges.

{{doneWhenLabel}}: The drainage layer is completely separated from the space above by a mesh or moss barrier.

{{whyLabel}}: Charcoal acts as a chemical filter, absorbing toxins and preventing the "swampy" smell common in closed systems.

{{howLabel}}:

• Sprinkle a thin layer (approx. 0.5 cm) of activated horticultural charcoal over the mesh/moss barrier.
• Focus on covering the center area; it doesn't need to be thick, just consistent.
• Use a funnel if the container opening is narrow to avoid charcoal dust on the glass walls.

{{doneWhenLabel}}: A thin, dark layer of charcoal is visible above the barrier.

{{whyLabel}}: Standard potting soil is too dense; a custom mix ensures the aeration and drainage tropical roots need.

{{howLabel}}:

• Combine 2 parts coco coir, 2 parts orchid bark, and 1 part worm castings in a bucket.
• Add a handful of charcoal bits to the mix for extra filtration.
• Lightly dampen the mix with a spray bottle until it feels like a wrung-out sponge (moist but not dripping).

{{doneWhenLabel}}: You have a fluffy, well-draining soil mix ready for planting.

{{whyLabel}}: Sloping the soil creates visual depth and more surface area for planting.

{{howLabel}}:

• Add 5–8 cm of your substrate mix into the container.
• Use a tool to push more soil toward the back of the container, creating a 30-degree slope.
• Lightly tamp down the soil to remove large air pockets, but do not pack it tightly.

{{doneWhenLabel}}: The soil is sloped from back to front, occupying about 1/4 of the container's height.

{{whyLabel}}: Stones and wood provide structure and a sense of scale, making the terrarium look like a real landscape.

{{howLabel}}:

• Place 1–2 larger "hero" elements like a piece of Dragon Stone or Driftwood.
• Press them firmly into the substrate so they don't shift later.
• Arrange them to follow the slope you created for a natural aesthetic.

{{doneWhenLabel}}: The main structural elements are securely placed in the landscape.

{{whyLabel}}: Removing excess soil and checking for pests prevents disease and mold in the enclosed environment.

{{howLabel}}:

• Remove plants from their plastic pots and gently shake off excess nursery soil.
• Trim any dead or yellowing leaves with clean scissors.
• Rinse the roots lightly in room-temperature water to remove any hidden pests or fertilizers.

{{doneWhenLabel}}: Plants are clean, trimmed, and ready to be placed in the soil.

{{whyLabel}}: Proper spacing and depth ensure the plants can establish roots without competing too early.

{{howLabel}}:

• Use long tweezers or your fingers to make a small hole in the substrate.
• Place the largest plant in the back (highest point of the slope) first.
• Add smaller plants around it, leaving at least 2 cm of space between them and the glass walls to prevent leaf rot.

{{doneWhenLabel}}: All plants are securely anchored in the soil with their roots fully covered.

{{whyLabel}}: Moss helps retain surface moisture and covers bare soil for a finished, professional look.

{{howLabel}}:

• Press small clumps of Cushion Moss or Sheet Moss onto the bare soil areas.
• Add a few small decorative pebbles or a thin layer of sand around the base of the hardscape for detail.
• Use a soft brush to clean any soil or dust off the inner glass walls.

{{doneWhenLabel}}: The soil surface is fully covered with moss or decorative elements, and the glass is clean.

{{whyLabel}}: This provides the baseline moisture needed to start the evaporation-condensation cycle.

{{howLabel}}:

• Use a spray bottle with distilled or rainwater (avoid tap water to prevent mineral streaks).
• Give the terrarium 5–10 sprays, aiming for the glass walls to wash down any remaining dust.
• The soil should look dark and damp, but there should be no standing water in the drainage layer.

{{doneWhenLabel}}: The plants and soil are evenly moistened, and the glass is clear.

{{whyLabel}}: These tiny beneficial insects act as a "cleanup crew," eating mold and decaying matter to keep the system healthy.

{{howLabel}}:

• Purchase a small culture of Springtails (Collembola).
• Gently pour the culture (usually in charcoal or soil) into the terrarium.
• They will naturally find their way into the substrate and begin their work.

{{doneWhenLabel}}: A small population of springtails is introduced into the ecosystem.

{{whyLabel}}: Finding the right moisture balance is the most critical step for a closed terrarium's survival.

{{howLabel}}:

• Close the lid and observe for 24 hours. You want light fogging in the morning that clears by midday.
• If the glass is constantly dripping with heavy water, open the lid for 2–4 hours to let excess moisture evaporate.
• Repeat this "venting" process daily until only a light mist appears on the glass.

{{doneWhenLabel}}: The terrarium shows light condensation in the morning and clears up during the day.

{{whyLabel}}: Incorrect lighting is the #1 cause of terrarium failure (either cooking the plants or causing leggy growth).

{{howLabel}}:

• Place the terrarium in a spot with bright, indirect light (e.g., near a North or East-facing window).
• NEVER place it in direct sunlight, as the glass will act like a greenhouse and cook the plants.
• Keep it away from radiators or air conditioning vents to maintain a stable temperature (18–27°C).

{{doneWhenLabel}}: The terrarium is placed in a stable, brightly lit location without direct sun.